High-Quality Pipe Floats for Water Transfer, Mining and Marine Pipeline Systems Manufacturer, Pricelist

A: You need to ensure total buoyancy exceeds total weight. Calculate the combined weight of the pipe itself plus the weight of the conveyed material inside (e.g., slurry, water) and connected accessories. The floats should provide at least 20-30% surplus buoyancy above this total weight to keep the pipeline floating properly (typically maintaining about 1/4 of the pipe diameter above the water line).

A: The warranty period begins on the date the buyer hands over the goods to the investor and concludes after the first 18 (eighteen) months following the handover date, or 12 (twelve) months after the installation date, whichever milestone arrives first.

A: Yes, absolutely. Polyethylene (PE) offers superior resistance against saltwater corrosion, aggressive UV radiation, and severe marine chemical degradation. They are widely preferred over traditional steel pontoons in marine environments because they never rust or oxidize.

A: All floats feature a heavy-duty virgin Polyethylene (PE) outer shell with wall thicknesses from 5 mm to 14 mm depending on the model. Each float is internally filled with closed-cell polyurethane foam for maximum structural rigidity. The tough PE shell absorbs high external impact, while the foam core guarantees float retention even in puncture events.

A: Because of the non-water-absorbing closed-cell urethane core inside each float, the unit will not sink even if punctured. Minor punctures can be seamlessly repaired: simply pull the float out of the water, allow the shell area to dry, and repair it using a standard HDPE plastic welding kit. Alternatively, individual modular halves can be easily unbolted and replaced on-site without disturbing the entire line.